|
Bars and Shafts
- 26 inches major diameter
- 40,000
lbs
- 400
inch long
Open-Die Rings & Disks
- 75
inches outside diameter
- 18,000
lbs
Squares and Rectangles
- 1200
square inches max. cross section
- 18,000
lbs
Sleeves
- 40 inches outside
diameter
- 22
inches inside diameter
- 120
inches length
- 18,000
lbs
Pots
and Die Forgings
- 75
inches outside diameter
- 18,000
lbs
Rolled
Rings
- 48
inches outside diameter
- 13
inches face length (height)
|
- Solution
Annealing
- Annealing
- Normalizing
- Water
Quenching
- Polymer
Quenching
- Tempering
- Stabilization
- Age
Hardening
- Stress
Relieving
|
Rough
Complete rough machining capabilities for everything we forge
Finish
Select semi-finish and finish machining capabilities for specific applications. Ask your account manager for details
|
Destructive
- Tensile
- Hot Tensiles
- Charpy (3 pieces) @ RT
- Charpy (3 pieces) below 100 F
- Chemical Product Analysis (Chem Check)
- F.A.T.T.
- Macro
- Microstructure with delta ferrite
- Grain Size
- Decarb. Test
- Microhardness & Grain Size
- Inclusion Content
- Jominy Hardenability
- Bend Test
- Heat Treatment
- Drop Weight/Nil Ductility
- Special ferrite counts
- Stress Rupture to E139 & E292
- Corrosion Testing to A262 Pract A, A262 Pract B, A262 Pract E,
G48 Method A
- Dynamic Tear
- Creep Rupture
- Fracture Toughness
- Fatigue
- AMS 2301 Rev. H upgrades
- MIL-S-5000
- MIL-S-6709A
- AMS 2300 Rev. G
- AMS 6414 and/or MIL-S-8844
Non-Destructive
- Ultrasonics
(All Specifications)
- Magnetic
Particle (Wet, Dry, Fluorecent & Visible)
- Liquid Penetrant (Fluorescent & Visible) utilizing only
ASME approved consumables
|
